AmmoSight

Dispatch / 11.16.26· Firearms ·A3 Industries

A3 Industries Sells a $999.95 Bullpup Conversion Kit for the 10mm and .45 ACP Stribog, 100 Made

The maker's product page lists the 16-inch bullpup lower for the Stribog SP10 and SP45 at $999.95 with a 3.5-pound RAVE-140 trigger installed, ships it as a part that is not a firearm and says the installed gun is a short-barreled rifle.

By Published
Credit: A3 Industries

Key Facts

  • A3 Industries lists its Stribog SP10/SP45 bullpup conversion kit at $999.95 in a run of 100 units.
  • The kit fits the 10mm Stribog SP10 and the .45 ACP SP45, not 9mm models.
  • An assembled Stribog bullpup measures 16 inches and weighs about 6.5 pounds.
  • A RAVE-140 trigger with a 3.5-pound pull comes installed and cannot be swapped.
  • A3 says installing the kit configures the Stribog as a short-barreled rifle.

A3 Industries lists a bullpup conversion lower for the Grand Power Stribog SP10 and SP45 at $999.95 on its product page, in a run limited to 100 units. The page went up on October 30, 2026, by the shop’s product data, and A3 showed the kit as available to order on November 16.

The kit replaces the factory lower receiver on the 10mm SP10 and the .45 ACP SP45. A3 says it installs in about 10 minutes and does not fit 9mm Stribog models. Assembled, the Stribog measures 16 inches overall. The conversion lower weighs 2.5 pounds on its own and about 6.5 pounds with the upper installed.

Data
Spec Detail
Compatibility Grand Power Stribog SP10 (10mm) and SP45 (.45 ACP), not 9mm models
Overall length, assembled 16 in
Weight, lower only 2.5 lb
Weight, with upper about 6.5 lb
Trigger RAVE-140, 3.5 lb pull, installed
Material 6061 aluminum, low-gloss black anodized
Installation about 10 minutes
SKU and price BPC-STR10, $999.95

A3 machines the lower from 6061 aluminum with a low-gloss anodized black finish, makes it in the United States and backs it with a lifetime warranty. A RAVE-140 trigger with a 3.5-pound pull comes installed, along with a Lingle Industries bolt catch, an ambidextrous selector and a textured paddle magazine release. A3 modified the trigger for this conversion, and the page says it cannot be swapped for another. Its furniture is A3’s Xeno reduced-angle AR grip, a padded cheek rest and a polymer CQB butt plate with a rubberized pad. The lower takes only factory Stribog magazines, not UMP magazines.

An optional hand stop is included. The page warns that without it a suppressor or forward-directing muzzle device must be used, because the support hand can otherwise be exposed to muzzle blast on a 16-inch gun. A3 also advises against the kit for left-handed shooters, since the Stribog’s right-side ejection port sits close to the face in the bullpup layout.

The Stribog’s lower is not the serialized part, so A3 ships the conversion lower directly to buyers as a part that is not a firearm. A3’s page says installing it configures the Stribog as a short-barreled rifle (SBR), that federal SBR rules and enforcement have changed recently while state and local laws vary, with some states restricting or prohibiting SBRs, that federal law still requires an approved ATF Form 20 before an SBR crosses state lines, and that buyers are responsible for confirming the configuration is legal where they live. ATF said on October 9 that it had stopped enforcing the National Firearms Act’s registration requirements for short-barreled rifles and other covered items after the August 5 Silencer Shop Foundation v. ATF injunction, and its guidance says enforcement could resume.

The Firearm Blog described the kit on November 16, 2026. A3’s shop listed it in stock at $999.95 that day, with a notice that lead times are longer than usual because of order volume, and gave no date for the remaining units to run out.

Sources

  1. 1 A3 Industries · Stribog SP10/SP45 Bullpup Conversion Kit · accessed 2026-11-16
  2. 2 The Firearm Blog · A3 Industries Turns the 10mm & .45 Stribog into a Bullpup · accessed 2026-11-16

For brands and PR

Covering your product? Send launch details, press images and review samples to the newsroom. Samples do not guarantee coverage or a positive review.

Contact the newsroom

Related Stories