Dispatch / 11.20.26· Suppressors & NFA ·Daniel Defense
Daniel Defense Launches NULL556 Inconel Suppressor Under 15 Ounces for 5.56 Rifles
The 3D-printed NULL556 has a suggested retail price of $999 and comes in FDE or black Cerakote. A steel hub mount threads onto ½ x 28 TPI barrels.

Key Facts
- Suggested retail price of the NULL556 suppressor is $999, in FDE or black Cerakote.
- The release lists a weight under 14.7 ounces. The product page says under 15 ounces.
- Material is 3D-printed Inconel, a nickel-based superalloy, built by DMLS metal additive manufacturing.
- A steel hub mount threads directly onto ½ x 28 TPI barrels.
- The release says the suppressor is available now. The product page shows an "AVAILABLE SOON" banner.
Daniel Defense said in its release on Monday, Nov. 16, that the NULL556 suppressor, 3D printed from Inconel, weighs less than 14.7 ounces and has a suggested retail price of $999.
The NULL556 is the newest member of the company’s NULL family of suppressors. It is a hard-use model, built for sustained high-volume firing and repeated heat cycles. The release gives the weight as under 14.7 ounces, while the maker’s product page says under 15 ounces.
Inconel is a nickel-based superalloy. The product page says the can is made by metal additive manufacturing using 718, and calls the process DMLS. That prints complex internal geometry as a single structure and reduces the need for individually machined baffles, welds and assembly steps.
Inside, a multipath baffle system directs gas flow, slowing and cooling the gas without choking the host rifle. End cap apertures at the muzzle keep gases moving away from the shooter. The product page lists a sound reduction of approximately 20 dB, which varies with barrel length and ammunition, and says the can is optimized for heavier grain and defensive ammunition, 62gr and up.
The company said it tested the suppressor under heavy cyclic firing well past the point of visible thermal stress. It credits conductive structural material, increased flow geometry and the added surface area of the multifaceted outer tube. “We set out to eliminate the compromises traditionally associated with hard-use suppressors,” said Jacob Becker, Director of Marketing at Daniel Defense.
A steel hub mount threads directly onto ½ x 28 TPI barrels, the thread pitch of most common 5.56 NATO rifles. The company published no list of specific rifles. Finishes are FDE and black Cerakote.
The release says the suppressor is available now, while the product page carries an “AVAILABLE SOON” banner. More information is at danieldefense.com.
Sources
- 1 The Shooting Wire · Daniel Defense Introduces NULL556, a Sub-16-Ounce, High-Flow Hard-Use Suppressor · accessed 2026-11-20
- 2 Daniel Defense · NULL556 Suppressor | Run Hard. Breathe Easy. | Daniel Defense · accessed 2026-11-20
For brands and PR
Covering your product? Send launch details, press images and review samples to the newsroom. Samples do not guarantee coverage or a positive review.
Contact the newsroomRelated Stories
Suppressors & NFA · Nov 18
Ambient Arms Launches 9.5-Ounce Titanium .30 HUNT and Over-Barrel HUNT-R Hunting Suppressors at $949 and $1,149
The titanium .30 HUNT lists at $949 and the shorter .30 HUNT-R at $1,149, both available November 18, 2026.
Suppressors & NFA · Nov 16
ATF Says Electronic Form 4 Transfers Averaged Four Days in October After a Record 2.5 Million NFA Applications in 2026
The Nov. 16 release puts individual Form 4 transfers at four days in October 2026 against about 247 days in fiscal 2023, with Form 1 and trust transfers at five days and tax-exempt Forms 3 and 5 at one day, after the $200 transfer tax fell to zero.
Suppressors & NFA · Nov 20
ATF Keeps Form 5320.20 for Unregistered Short-Barreled Rifles Crossing State Lines After October Relief
ATF's November 16 update says owners of unregistered short-barreled rifles and shotguns must still get Form 5320.20 approval to travel interstate. The filing goes by email, not eForms.