CZ P-10 C 9mm vs Glock G19 Gen5 9mm

These two compact 9mms match on capacity (15+1), barrel length (4.02"), and overall footprint, with length within 0.02" and width within 0.08". The meaningful gaps are trigger pull and weight: the CZ P-10 C breaks at 4.5 lbs versus the Glock's 5.5 lbs, while the Glock G19 Gen5 weighs 23.63 oz versus the CZ's 26 oz, a 2.37 oz gap on the belt. Neither base model has an optic cut, so a red dot setup requires either the CZ P-10 C OR variant, the Glock G19 Gen5 MOS, or aftermarket slide milling on the standard models.

Pick the CZ P-10 C if:

• You want a 4.5 lb striker trigger with a defined wall and short reset as the factory pull, instead of paying for an aftermarket kit to drop the Glock's 5.5 lb pull
• You want a cold hammer-forged steel barrel with 6-groove rifling as standard equipment, a durability spec Glock reserves for its Marksman barrel without advertising the manufacturing method
• You prefer a grip angle close to the 1911 standard rather than the steeper Glock angle, with three interchangeable backstraps for hand fit

Pick the Glock G19 Gen5 if:

• You want 2.37 oz less weight on the belt for all-day carry comfort
• You want the largest pistol aftermarket on the market, where any holster, light, sight, or magazine you can name was designed for the G19 first and adapted to other guns later
• You want the deepest armorer and parts-supply network of any handgun, which matters if the gun ever needs service in a remote area or you want to do your own maintenance

Both ship with three (Glock) or two (CZ) magazines, both have interchangeable backstrops, and both use polymer frames with steel slides. The choice is ecosystem depth versus a better trigger and barrel out of the box.